Facile in-situ deposition of Pt nanoparticles on nano-pore stainless steel composite electrodes for high active hydrogen evolution reaction

Hydrogen is regarded as a clean and highly efficient renewable energy. The platinum catalytic electrode is widely used in hydrogen evolution reaction (HER), but it has affected its commercial application because of its high cost. Therefore, the study on cost-effective and high-active catalysts toward HER is required to realise large-scale hydrogen production. In this work, we present a novel Pt/NPSSF catalyst prepared by a one-step in-situ deposition of Pt precursor on a nano-porous stainless-steel film (NPSSF) substrate. The prepared catalyst was evaluated in acidic and alkaline conditions for its HER activities. The preliminary results demonstrate that the Pt/NPSSF electrodes have superior catalytic activity for HER. The hydrogen overpotential of Pt/NPSSF is ?70mV (RHE) in the alkaline solution, which is lower than the Pt electrode of ?184mV. At the same time, we also obtained ?71.2 mV of overpotential for the Pt/NPSSF electrode, which is similar to the ?73mV of Pt electrode in the acid solution. The Tafel graphs plotted from the LSV curves indicate the different HER mechanism in the alkaline and acid solution. The HER kinetics of the Pt/NPSSF were studied using EIS. Comparing Pt/NPSSF to Pt electrode, the multi-pore structures of NPSSF and the Pt nanoparticles active sites decrease the charge transfer-resistance for the HER process. The facile preparation, high efficiency and low value of the Pt/NPSSF composite electrodes demonstrate the promising applications in HER.     

利用碳钢铸坯组织灰度图获取C含量分布的方法

摘要：基于热酸洗腐蚀原理与图像光学理论，提出运用金属低倍组织灰度分析技术（灰度分析法）获取中高碳钢铸坯的低倍组织中不同位置不同区域不同尺度的一维、二维C元素含量分布。偏析严重的位置得到的C元素含量高，初始凝固的晶粒中心位置得到的C元素含量低，说明通过灰度分析法计算的C元素含量分布能与低倍组织形貌很好地对应。同时，通过电子探针与灰度分析法的测量结果对比，发现二者C元素含量的变化趋势具有很好的一致性，这验证了灰度分析法的有效性。另外，低倍组织图像整体亮度的改变不会造成由灰度分析法所测量的C元素含量发生明显改变，则表明灰度分析法对测量环境的变化具有一定的抗干扰能力，也间接说明了其可靠性。     

镁对非调质钢中组织及硫化物的影响

摘要：为了探究不同镁含量对非调质钢中组织和硫化物形态、尺寸、分布及成分的影响，采用蔡司金相显微镜、扫描电子显微镜、小样电解等方法，分析了经高温电阻炉冶炼不同镁添加量的49MnVS3非调质钢。结果表明，由于镁蒸气压较高，在实验室冶炼中大量挥发，导致钢中镁的实际平均收得率仅为310%；镁的质量分数为0～22×10-6时，随着镁的质量分数的增加，钢中硫化物形态由Ⅱ类逐渐向Ⅰ类、Ⅲ类转变；钢中硫化物尺寸增大，硫化物的分布均匀性得到显著改善；钢中复合夹杂物比例明显增加，但MnS的比例出现下降；形成了细小弥散的氧化物，增加了奥氏体形核质点，具有细化组织的趋势。     

罩式退火温度对高强IF钢组织及性能的影响

为研究不同退火温度下高强IF钢的组织性能及织构的变化规律,采用温箱式电阻炉加热模拟罩式退火工艺,研究了不同退火温度下高强IF钢210P1冷轧板力学性能;对不同退火温度钢板的r90进行了统计并对其进行显微组织观察;采用X射线衍射仪及热场发射扫描电镜对不同退火温度的罩式退火成品板进行了织构分析。结果表明,在高强IF钢210P1冷轧板的罩式退火过程中,提高退火温度将使晶粒明显长大。随着退火温度的升高,屈服强度及抗拉强度下降,伸长率升高,n值略有上升,板材横向r值增加较明显,有利织构{111}取向密度增加,不利织构{100}取向密度降低。     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

软土地区管幕群顶管施工地面沉降监测与分析

依托上海14号线桂桥路站管幕段实例工程,对管幕群顶管顶进施工过程地面沉降情况进行监测,分析群顶管施工对地面沉降的影响,在此过程中对本工程采用水土分算或合算进行讨论。根据顶进过程实际工况和监测数据,分析管幕群顶管施工影响地面的原因,提出相应控制措施。结果表明:①管幕群顶管施工引起最大地面沉降出现在始发井出加固区区域;②在本工程中采用水土合算计算正面土压力较为符合实际情况;③管幕群顶管施工过程中影响地面变形的因素主要包括前舱压力、顶进速度、洞门止水、管壁摩擦和同步注浆等方面。     

基于激光闪光法的立式热扩散率测量装置研究

介绍了基于激光闪光法的立式热扩散率测量装置,利用脉冲激光对样品进行均匀加热,使样品内部产生一维热流,并通过红外探测器测量样品温升信号,采用立式真空加热炉控制测量温度环境,实现室温至1600℃的热扩散率测量。用该装置测量厚度为1. 1 mm,直径为10 mm的不锈钢样品,测量结果与PTB参考数据的偏差小于1%。     

基于CSC方法的钢铁行业节能减排技术潜力分析

为了研究中国钢铁行业的节能减排潜力，以35项钢铁行业先进节能减排技术为研究对象，建立节能供应曲线(Conservation Supply Curve，简称CSC)模型，分析影响钢铁行业的节能减排收益、成本效益以及钢铁生产流程工序层面的节能减排潜力因素。结果表明，这35项技术全部应用可实现3.01 GJ/t的节能量以及398.22 kg/t的CO2减排量。将结果与第十三个五年计划推广技术作对比，在当前情况下，约有50%的推广技术并不符合成本效益；运用CSC模型进行了钢铁生产流程工序层面的节能减排潜力研究，得到各个工序的节能量和减排量，并据此分析了各项技术未来的发展趋势和应用前景。